Speaker not working.

Comments

3 comments

  • Bruce

    Hi Bertie27,

     

    I am sorry to hear that your Jaybird X2's left earbud stopped working. This is not the quality we're expecting from our product.

     

    Here is a list of steps for the Factory Reset:

     

    1.Make sure your buds are powered off.

    2.From an off state, press and hold the power button for 8 seconds until the LEDs flash red and green.

    3.Hold both volume buttons for eight (8) seconds. The LED will flash rapidly and you should hear a double tone. Your buds have now been reset.

     

    You can further isolate the issue by testing using a different device or a device with a different OS and checking the voice prompts if it plays on both sides.

     

    Feel free to reach back to us by replying to this post or contacting our other support channels at https://www.jaybirdsport.com/en-us/support.html

     

    Warm Regards,

    Jaybird_Bruce

    Jaybird Customer Experience

    #PowerYourPassion

    0
    Comment actions Permalink
  • Bertie27
    Hi Bruce Thanks for email but the speaker is still not working, is there anything else I can do to fix them. Thanks Robert Edmonds
    0
    Comment actions Permalink
  • Bertie27
    Hi Bruce I have tried what your told me but the left speaker is still not working, is there anything else I can do. Thanks Rob.
    0
    Comment actions Permalink

Please sign in to leave a comment.